The Wear Layer of SPC Vinyl Click Flooring Plank is the key for Quality
In recent years, in the flooring industry, many stone-plastic floors have increased the thickness of the plates from 2 mm to 3 mm, and then to 4 mm, 5 mm, 6 mm… Fudge consumers, so most consumers naturally think of stone The thicker the SPC Flooring, the more durable it is, and the better the quality. So, is this really the case?

In fact, the Rigid Core Hybrid Flooring with a thickness of 4 mm has reached the international standard thickness. In addition, for wood flooring, the thickness is not the standard for determining the quality of the floor. The thick plate is the same as the thin plate, and the surface cannot be used once it is worn out. This is especially true for stone-plastic floors. The UV quality of the surface layer is largely related to the service life of the stone-plastic floor, not the thickness of the substrate.
Spc Lvp Flooring is generally composed of four layers of material structure, which are wear-resistant layer, decorative layer, substrate layer and balance layer. The wear-resisting number of household stone-plastic floor should be greater than or equal to 200,000 rpm, and the wear-resisting number of Waterproof Vinyl Flooring Planks in public places should be greater than or equal to 300,000 rpm.

How to distinguish the quality of the wear-resistant quality of stone-plastic flooring
- It is necessary to look at the test report. There are clear descriptions of the formaldehyde and wear resistance of the floor.
- Vinyl Click Flooring Plank can take a small piece of product, with 180 mesh sandpaper on the surface of the product polished 20-30, if the decorative paper is found to be worn, it means that the wear layer is easy to damage to a certain extent, not wearable. Usually the qualified wear layer is polished after 50 times, the surface layer will not be damaged, and the decorative paper will not be damaged.
- Observe whether the surface is clear and has white spots.
